2N® Access Unit M 13.56 MHz, NFC ready
This version of the 2N® Access Unit M RFID reader can read
most cards at a frequency of 13.56 MHz. It is suitable for companies
which prefer traditional RFID technology. The reader supports NFC
technology, so employees who don’t want to wear a card can use their
mobile phone to gain access. Administer a unit remotely via the secure
web interface or in the 2N® Access Commander software
Technical Parameters
Interfaces |
|
Power supply: | PoE and/or 12 V/1 A DC |
PoE: | 802.3af (Class 0–12.95 W) |
LAN: | 10/100BASE-TX with Auto-MDIX, RJ-45 female (pigtail) |
Recommended cabling: | Cat-5e or better |
Active switch output: | 8 to 12 V DC/max 600 mA |
Passive switch: | NO/NC contacts, up to 30 V/1 A AC/DC |
Inputs: |
2 inputs - in passive/active mode (-30 V to +30 V DC) OFF = open or Uin> 1.5 V ON = short-circuit or Uin< 1.5 V |
|
|
Tamper switch: | Native part of the 2N Access Unit M |
Audio: | Buzzer, 1 W/8ohm |
Supported protocols: | DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog |
|
|
RFID Card Reader |
|
Supported frequencies: | 13.56 MHz variant (optionally secured) |
13.56 MHz: |
ISO14443A, ISO14443B, NFC support, reads UID (CSN) |
|
|
|
|
Mechanical Properties |
|
Cover: | Tempered glass with durable plastic |
Operating temperature: | -40°C to +60°C |
Storage temperature: | -40°C to +70°C |
Operating relative humidity: | 10%-95% (non-condensing) |
Dimensions (surface mounted): | 50 (W) x 133 (H) x 27 (D) mm |
Weight: | max 0.5 kg |
Cover rating: | IP55 and IK07 |
|
|
Login to see prices & shop
Out of stock